INSTEON ApplianceLinc Outdoor (2456S3E) Manual - Manual (Page 7)

ApplianceLinc Owner’s Manual
Page 7 of 14
USING APPLIANCELINC
LED and Beeper Activity
LED Activity
LED Activity ApplianceLinc Status/Setup Mode
Solid green Load is on
Solid red Load is off
Blinking green Linking Mode
Blinking red Unlinking Mode
Tapping the Set Button
If ApplianceLinc is in a setup mode, tap the Set button to exit the setup mode and return to normal
operation.
Beeper Activity
Beeper Activity ApplianceLinc Status
Single beep
Entered setup mode or moved to the subsequent setup mode
Exited setup mode (if Set button was tapped)
Feature was programmed
Double beep Link established – ApplianceLinc will exit setup mode
Long beep Timed out of setup mode