CNB HDS4848DV - Manual (Page 32)

32
2-4-2. MENU > RECORD > Record
In Record, general recording options can be selected including overwrite, resolution, speed, recording
quality and etc.
•
Overwrite: Select Overwrite to overwrite recorded HDD data when it is full.
• Audio Record: Select Audio Record to record audio with video image.
• Resolution: Select recording resolution. The setting can be done by a group of 4 cameras
(1-4, 5-8, 9-12 and 13-16)
• Auto Deletion(days): Turn on Auto Deletion to delete any data older than the defined days
automatically.
•
Time Record: Set ips/quality for continuous recording
• Event Record: Set ips/quality for event recording
• Emergency Record: Set ips/quality for emergency recording mode.
Note : The ips needs to be set higher than 1ips for Audio recording at D1 or HD1 recording option,
otherwise there would be a time delay between recorded Audio and Video sync.
In Event, pre and post recording options for Event can be set.
• Pre-Event Duration: Video Images occurred
right before an Event can be recorded by setting Pre-
Event under Event Mode. Duration Pre-Event
recording can be set using Pre-Event(sec) up to 30
seconds.
•
Emergency Record Duration: Time duration
can be set for Emergency recording from 5 seconds to
30 minute or continuously by selecting No Limit option.
•
Event REC Duration: Set recording duration for
events up to 30 minutes.
In Schedule, fully detailed and specified recording schedules can be set by day, time, modes, cameras
and recording options.
Press
to add a new schedule. To remove an existing schedule, press next to it.
Press Setting to set recording options.
•
Use Default Setting: Check Use Default Setting to follow main recording setting under Record