Advantech 5000 Series - Manual (Page 76)

Chapter 6
$aaF
Name Read Firmware Version
Description Returns the firmware version code from a specified
ADAM-5000 system.
Syntax $aaF(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadeci-
mal address of the ADAM-5000 system you want to
interrogate.
F is the Firmware Version command.
(cr) is the terminating character, carriage return (0Dh).
Response !aa(version)(cr) if the command is valid.
?aa(cr) if an invalid operation was entered.
There is no response if the module detects a syntax
error, communication error or if the specified address
does not exist.
! delimiter character indicating a valid command was
received.
? delimiter character indicating the command was
in- valid.
aa (range 00-FF) represents the 2-character hexadecimal
address of an ADAM-5000 system.
(version) represents the firmware version of the ADAM-
5000 system.
(cr) is the terminating character, carriage return (0Dh).
ADAM-5000 6-11