Liquid Controls DMS Setup - Manual (Page 36)

36
Screen 9e: System Calibration (5/5)
System Calibration
These calibration information fields are for metrology use
and are not editable.
Calib Date displays date and time when the red selector
switch on the LectroCount register was last moved from
the calibration position to SHIFT PRINT position.
Calib Number displays number of times the red selector
switch of the LectroCount has been switched from the
calibration position to SHIFT PRINT position.
Calib Event displays number of times a calibration event
has occurred.
Config Event displays number of times a configuration
event has occurred.
For more information on
Calib Event and Config Event,
refer to page 64.
Press
Cnfg (F4) to return to the Screen 7 on page 28.
From there, move pointer to Product Calibration and
press ENTER to advance to Screen 10a on page 37.
(5/5) 1
01/11/05 11:50:25
1
24
29
SYSTEM CALIBRATION
Calib Date:
Calib Number:
Calib Event:
Config Event:
Prev Cnfg Main