Luna POLARIZATION ANALYSIS SOFTWARE - Manual

POLARIZATION ANALYSIS SOFTWARE
www.lunainc.com
3157 State Street | Blacksburg, VA 24060
[email protected]
Support phone: 1.866.586.2682
Luna’s Polarization Analysis Software can be used to
display the response of an optical component to a simulated
input polarization state. This software, combined with the
measurement data from Luna’s Optical Vector Analyzer™,
eliminates the tedious and difficult task of polarization
alignment often required for measurement of today’s
advanced optical components.
The software plots the insertion loss, group delay and impulse
response of an optical component to a user defined input
polarization state. Easy-to-use sliders allow the user to adjust
the simulated input polarization to any desired state.
Also plotted are the minimum and maximum insertion loss,
and the group delay and chromatic dispersion of the principle
states of polarization (PSP). In a separate graph, the
software displays all of the polarization averaged quantities
(IL, GD, CD, etc.) as well as PMD, PDL, Jones matrix
elements and time domain information. All of the generated
data can be saved for export to other plotting and analysis
packages.
LTPAS REV. 003 10/19/2012 ©Luna Innovations Incorporated, Roanoke, VA
All rights reserved.
Min/Max Loss
Polarization Analysis Software determines the
minimum and maximum loss at each wavelength.
Principle States
View the response of your component to
specific input states.
Visualize Polarization Effects
Visualize polarization effects such as
polarization dependent center frequency (PDF).
Use Polarization Analysis Software to get the
complete picture of your component’s
polarization dependence.