Master Appliance UT-100Si Ultratorch Soldering Iron_Heat Tool - Manual (Page 8)

Optional Accessories UT‑100Si
70-01-01
1mm dia. tapered needle
soldering tip
70-01-02
3.3mm dia. chisel soldering tip
(standard)
70-01-03
2mm dia. spade soldering tip
70-01-04
3mm dia. spade soldering tip
70-01-05
0.5mm dia. tapered needle
soldering tip
70-01-06
2mm dia. micro spade
soldering tip
70-01-07
0.5mm dia. square tapered
pyramid soldering tip
70-01-08
2mm dia. 35ϒ spade
soldering tip
70-01-09
3mm dia. 35ϒ spade
soldering tip
70-01-10
1mm dia. offset tapered
needle soldering tip
70-01-11
8mm dia. high powered
chisel soldering tip
70-01-12
3mm dia.. high powered round
head needle soldering tip
70-01-13
5mm dia. high powered long
tapered chisel soldering tip
70-01-15
7mm dia. 45ϒ spade
soldering tip
70-01-16
hot knife tip
70-01-50
2.5mm O.D./1.59mm I.D.
70-01-52
5.7mm O.D./4.9mm I.D.
standard
70-01-51
4.25mm O.D./3.3mm I.D.
70-01-53
8.0mm O.D./7.4mm I.D.
Outside Diameter
Inside Diameter
70-01-55
heat shrink tip
(standard)
70-01-54
heat shrink tip
70-52U
carrying strap
90-02
protective cap
70-01-14
4mm dia. x 7mm pitch
adaptor
Soldering Tips
Heat Tips
Ultratane™ Butane
“ULTRA-REFINED” by Master…the only approved butane for Ultratorches.
• Single piece universal tip
• Purest refining method possible
• Special non-clogging formula to permit extended use
P/N 51773 - 5.125 oz.
P/N 10448 - 26gm. canisters