MotorVac Cool Smoke EVAP Leak Detection System - Manual (Page 7)

[email protected] www.motorvac.com
Initial Setup
The Cool Smoke comes supplied with a 200ml (6.8 oz.) bottle of Cool Smoke FLUID. (PN: 400-1054)
1. The unit needs to be filled with fluid before being used for the first time.
2. Remove the dipstick.
3. Install the bottle fill nozzle and pour fluid into the machine through the dipstick tube.
4. Connect appropriate air/gas fitting on the bulkhead at the back of the unit.
Your Cool Smoke is now ready for its first use!
4