Multichannel Systems USB-ME64-128-256-Systems Manual - Manual (Page 19)

Troubleshooting
15
5.3
Setting Up and Connecting the USB-ME256-System
USB-ME-System is a high flexible system. Via MCS 68-pin high grade cables it is possible
to connect, for example, four MEA60-Systems or two MEA120-Systems or a ME-System
with at least 256 channels to the 256 analog inputs.
Example: The description of the installation includes an example setup with four MEA1060
amplifiers without blanking circuit.
Warning: Please read the separate user manuals of all devices before installation, especially
the warnings and safety information. Make sure all devices are switched off before you
connect them to the power supply. Damage to the devices and even fatal injuries may result
from improper installation or use.
Note: Using a USB hub for connecting the USB-ME-System to the computer is not recommended.
The system needs a broad bandwidth for the data transmission. Recording might not be possible,
especially if a second device that sends or receives continuous data streams, for example, a web
cam or USB speakers, is connected to the same USB port.