Dings Dynamics Group 40 Series small frame - Manual

40 Series Brake
Instructions
Bulletin No. BK4042 (2/12)
Standard Housing Inertia
Wt. Lbs. Rotating
Model Torque Parts
Lb. Ft. Net Pkg’d WK 2 in
Lb. Ft. 2
2-42001-012 3/4 or 3/8 1 1/2 2 1/2 .001
Table 1. List of Models
WARNING
Brake performance and features must be carefully
matched to the requirements of the application.
Consideration must be given to torque requirements,
especially where an overhauling condition exists,
as well as thermal capacity, ambient temperature,
atmospheric explosion hazards, type of enclosure and
any other unusual conditions.
Improper selection and installation of a brake and/or
lack of maintenance may cause brake failure which
could result in damage to property and/or injury to
personnel.
If injury to personnel could be caused by brake failure,
additional means must be provided to insure safety of
personnel.
Do not operate manual release or energize brake coil
before installation, in order to preserve prealignment of
rotating discs for ease of installation.
Figure 2. Dimensions of Brake
4740 W. Electric Avenue Milwaukee, WI 53219 414/672-7830 FAX 414/672-5354 www. dingsbrakes.com
IMPORTANT
Read this bulletin carefully before installing or operating
this brake. Failure to comply with these instructions
cancels all warranties.
Figure 1. 40 Series Brake
G040099-001