Dixon Valve 25 TON RAM SEC03 External Swaged RST and GAS - Manual (Page 5)

25 Ton Ram Instruction Manual Externally Swaged RSTxxxNOS Stems
customer service 800 • 355 • 1991 4 Section 3
Lift the hose assembly up and remove the pusher,
spacer ring and die halves from the
die bed. Remove excess lubricant.
Note: If gauge reads 10,000 PSI before swaging is
complete, than the ferrule or die used for that hose
end may be incorrect.
Contact Dixon for further assistance.
Dixon Valve and Coupling Company recommends that all
hose assemblies be tested as recommended by the Rubber Manufacturers Association.
Pushers for RSTxxxNOS Stems
Size Part Number
1 1/2”
2”
3”
RE150PUSH
D011-018
RE300PUSH
12