Nokta detectors Golden King NGR - Manual (Page 26)

Ground Balance
Ground Balance
On the Golden King Deep Processor Radar system, ground balancing is done
through the “GROUND BALANCE” menu. You can access the ground
balance menu both from the settings section or by pressing the
“GROUND BALANCE” key on the keypad.
AUTOMATIC MANUEL
When “GROUND BALANCE” is selected, you will see two tabs. These tabs are
“AUTOMATIC” and “MANUAL” ground balance tabs. You may switch from one
tab to another with the right/left direction keys. You can select the one you want
by pressing the “OK” key. The option you select will turn to red.
AUTOMATIC GROUND BALANCE
When the “AUTOMATIC GROUND BALANCE” is selected, you will see the
interface on the top right of the page.
20
GROUND SETTING
40cm
Reset Button
OK
40cm
RESET
AUTOMATIC GROUND BALANCE
AUTOMATIC GROUND BALANCE
MAXIMUM UPPER LEVEL
What you need to do is to eliminate the soil in the box on the left side of the
screen and turn it to green and save it by pressing the «OK» button.
Method:
Before doing automatic ground balancing, hold the search coil
about 10 centimeters above the ground and press “OK”.
With this operation, your equipment will take the ground as a
reference.
What you should do next is to raise the search coil about 40 centimeters
above the ground and press the «RESET» button.
10cm