Pach and Company Quantum QR Series QR5-QR5FF-QR5IP-QR5IPFF Manual User Manual
Page 17
Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qr5-qr5ip_manual.htm[5/19/2014 9:51:01 AM]
if directory exists
if directory does not exist
Function Code 04 - Clear All Tenant Directories
1.
2.
Enter 04 then #
3.
Do the following:
- Press 1 (to clear all directories) then press #
- Press * to cancel
Function Code 05 - Call Forwarding
Use function code 30 to enable
Function Code 06 - Add New Access Code
An access code is a keyless entry code to unlock the door. An access code can be programmed in 4, 5 ,6,7, or 8 digits, see
to change the access code s number of digits. Up to 100 access codes can be programmed.
1.
2.
Enter 06 then #
3.
Enter the access code (4-8 digit, see
), then press #
see
for keypad layout
4.
Enter name up to 16 characters, then press #