PASCO UI-5000 850 Universal Interface Instruction Manual - Manual (Page 10)

850 Universal Interface UI-5000
® ® 10 012-12355A
Refer to the Help menu or the online PASCO Capstone User’s Guide for detailed information
about each of the displays in the Displays palette.
Graph Display
For example, the Graph display has a Tool bar and other features such as selectable inputs for
the vertical and horizontal axes. Hover the cursor over a Tool bar item to see its Tool Tip..
In addition to the Tool bar, the Graph display has ‘handles’ for resizing the display. Click
anywhere in the Workbook page outside the Graph display to hide the Tool bar and ‘handles’.
Click anywhere in the Graph display to show the Tool bar and ‘handles’ again.
Axes Measurement Selection Menus
Each axis measurement selection menu shows options based on what sensors
are used with the interface, and if the interface is being used as a signal
generator. In this example, since a PS-2104 Force Sensor is connected,
Force (N) could be selected for the vertical axis, and Time (s) for the
horizontal axis.
The Equation/Constants drop down menu shows whatever equations, if
any, have been created for the experiment, and shows a list of experimental
constants from Speed of light (m/s) to neutron mass (kg).
Please see the online PASCO Capstone User’s Guide for detailed information
about the measurement selection menu, including QuickCalc.
Tool bar
Tool Tip
Horizontal axis
measurement
selection menu
Resizing
‘handle’
Vertical axis
measurement
selection menu
Axis
Measurement
menu