0 install the mvp wire harness and route the wires – Electronics International MVP-50P User Manual

Page 47

Advertising
background image

4.0

Install the MVP Wire Harness

and

Route the Wires

4.1 Attach the MVP 25-pin D-sub Connector to the MVP:

4.2 Connect the EDC RS422 Wires to the MVP RS422 Wires:

4.3 Connect the MVP Harness to the Master Warning and Caution Lights:

4.4 Connect the MVP Harness to the Voice Alarm Control Panel (AV-17CP):

4.5 Connect the MVP Harness to the Audio Panel:

4.6 Connect the MVP Harness to the External Intensity Control Pot (CP-1):

4.7 Connect the MVP Harness to the Moving Map Data Out from the GPS:

4.8 Connect the MVP Harness to the Fuel Data Input on the GPS:

4.9 Connect the MVP "Transmit Lockout Input" Pin to the Transmit Key:

4.10 Connect the MVP Harness to Power and Ground:

40

Advertising