General Tools and Instruments CL10 - Manual (Page 5)

PRODUCT OVERVIEW
1. LCD
2. (POWER on/off) button
3. Transmission power (I, II or III) LEVEL SEL. button
4. Transmitting code START/STOP transmission button
5. Transmitting CODE SEL. button. Press and hold to
enter selection mode; press briefly to exit.
6. ▼ button (press to reduce power level/change
transmitting code). Levels I, II and III and codes
F (default), E, H, D, L, C, O and A are available.
7. ▲ button (press to increase power level/change
transmitting code)
8. (Mute) on/off button
9. (Flashlight) on/off button
10. + jack
11. (ground) jack
12. Flashlight (on top)
13. Fold-out stand (on back)
14. Battery compartment (on back)
1. (Transmitter battery status) icon
2. Transmission power level (I, II or III)
3. Transmitting code
4. AC line voltage
5. DC line voltage
6. Line voltage measured (in voltmeter mode)
7. Transmitting status
8. Code being transmitted
9. Transmission signal amplitude
10. (Line voltage detection mode) icon
11. (Mute on) icon
5
¹
Ƹ
ƹ
Fig. 2. The transmitter’s controls,
display and physical features
Fig. 3. All possible indications on
the transmitter’s LCD