General Tools and Instruments DCS300 - Manual (Page 6)

6
INSTALLATION
BATTERY INSTALLATION:
1. Use a screwdriver to open the screw on the battery
compartment cover (See Fig. 4).
2. Insert one “9V” alkaline battery (6LR61) into the battery
compartment. Close the battery cover and fasten
the screw (See Fig. 5).
BATTERY PRECAUTIONS!
• Remove the battery while cleaning the unit.
• Remove the battery before storing the unit for
a long period of time.
• Be sure to install the battery with the correct polarity
as indicated in the battery compartment.
• Properly dispose of the batteries. Exposure to high
temperatures can cause the batteries to explode.
Do not dispose in fire. Place tape over the terminals
to prevent direct contact with other objects. Some
countries have regulations concerning battery disposal.
Please follow all applicable regulations.
DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 6