Accton Technology Direk Tronik ES4524D - Manual (Page 412)

Interface Commands
45-6
45
Related Commands
negotiation (45-3)
capabilities (flowcontrol, symmetric) (45-4)
media-type
This command forces the port type selected for combination ports 21-24/45-48. Use
the no form to restore the default mode.
Syntax
media-type mode
no media-type
• mode
-copper-forced - Always uses the built-in RJ-45 port.
-sfp-forced - Always uses the SFP port (even if module not installed).
-sfp-preferred-auto - Uses SFP port if both combination types are
functioning and the SFP port has a valid link.
Default Setting
sfp-preferred-auto
Command Mode
Interface Configuration (Ethernet)
Example
This forces the switch to use the built-in RJ-45 port for the combination port 48.
shutdown
This command disables an interface. To restart a disabled interface, use the no
form.
Syntax
[no] shutdown
Default Setting
All interfaces are enabled.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Console(config)#interface ethernet 1/48
Console(config-if)#media-type copper-forced
Console(config-if)#