SKC 228-9530 QuickTake 30 User Manual
Page 6
5
Run Time Features:
User-selectable features, user-adjustable presets (see
Advanced
Setup)
Preset timed runs:
1, 2, 5, 10, or 15 min
Manually set continuous
run with manual shut-off: 1 to 999 min (repeats 1 to 999-min
runs
indefi nitely until user stops
pump or power supply is depleted)
Intermittent
sampling:
See Advanced Setup
Flow Fault Features: If the pump is unable to compensate due to excessive back
pressure, the pump will go into fl ow fault mode (see page 17 for
details). Flow fault features are enabled as the default setting.
Flow fault may be disabled at the user’s option.
See Advanced Setup.
Flow
fault:
Flow fault displays immediately
Pump shuts off after 5 seconds
Fault
restart: Pump attempts restart every 10 seconds
up to fi ve times
Media Compatibility: Viable cascade impactors, spore trap cassettes (e.g., VersaTrap),
asbestos cassettes, microvacuum cassettes, and other impaction
samplers that require fl ows from 10 to 30 L/min
Tubing:
Requires 3/8-in ID tubing
Housing: ABS
plastic
Dimensions:
9.3 x 8.4 x 3.5 in (23.6 x 21.3 x 8.9 cm)
Weight:
4.8 lbs (2.2 kg)
Indicates a warning, caution, or note