Usually – Gilderfluke&Co Mp3-50 Audio & Show Controllers User Manual

Page 54

Advertising
background image

2) PlayLists Tab: Set up as needed, if needed.
3) Audio Tab: Set audio levels and EQ as needed. Disable Re-

alTime Audio Level Control. Enable/Disable amplifier as
needed.

4) Input Tab: You will be using the MPU inputs in this case. Dis-

able ALL of the Optoisolated Inputs.

5) MPU Input Tab: Set up the inputs to select and start Au-

dioFiles and ramp audio levels, as needed.

6) Serial Control Tab: The Brick Address is usually set at '0', un-

less you will be accessing the card using Net Serial com-
mands. The Repeater Control Channel must be set to ‘5’.
First animation Channel Number must be set to '0'.
Disable/Enable Net Serial and IR Trigger modes as needed
(these are

usually

disabled)

7) DMX-512 Control Tab: Enable DMX-512 Control, unless you

are using MIDI, Net Serial or IR Trigger Modes. Enable DMX-
512 checksums if you will be feeding DMX-512 from any
Gilderfluke & Company products (

usually

enabled). The Re-

peater Control Channel and First Animation channel num-
ber were set on a previous tab.

8) MIDI Control Tab: Disable MIDI, unless you plan to use it.

Disable MIDI Notes Trigger Animation Playback, unless you
plan to use it. Set MIDI Channel Number and Animation First
Note number if you will be using MIDI, otherwise, ignore
them.

9) Flash Setup Tab: Enable Animation from Flash, unless you

will never be using the onboard show storage.
Enable/Disable outputs when stopped, as needed. Leave
the Write Protect Flash unchecked, or you will not be able to
save the show you are creating to the Mp3-50/8 or Mp3-
50/40
. Disable it after you have completed programming, if
needed. The Repeater Control Channel and First Animation
channel number were set on a previous tab.

c) Mp3-50/40 with One Audio Level Control Channel: This configu-

ration adds a single analog channel which can be used to con-
trol the audio level of the Mp3 Player as a part of the show con-
trol file.

This configuration gives you a show capacity of approximately

G

ILDERFLUKE

& C

O

.205 S

OUTH

F

LOWER

S

TREET

B

URBANK

, C

ALIFORNIA

91502 818/840-9484 800/776-5972

FAX

818/840-9485

E

AST

C

OAST

/F

LORIDA

O

FFICE

7041 G

RAND

N

ATIONAL

D

RIVE

S

UITE

128d O

RLANDO

, F

L

. 32819 407/354-5954

FAX

407/354-5955

46 of 119

Advertising
This manual is related to the following products: