Gilderfluke&Co DMX-512 Input Servo Motor Controller - Manual (Page 22)

mum position (100%/255/0FFh). 3
4) Adjust the first endpoint:
a) If you set the movement to the minimum position:
Use the ‘1’, ‘4’ and ‘7’ keys on your keypad to adjust
this endpoint. The movement will follow as you ad-
just these settings.
b) If you set the movement to the maximum position:
Use the ‘2’, ‘5’ and ‘8’ keys on your keypad to adjust
this endpoint. The movement will follow as you ad-
just these settings.
5) Set the output to opposite extreme position:
a) If you have a programming system or Togglodyte
attached: Just set the output to either the mini-
mum position (0%/0/00h) or maximum position
(100%/255/0FFh).
4
b) If you only have the computer: Use the ‘3’, ‘6’ and
‘9’ keys on your keypad to force the movement to
either the minimum position (0%/0/00h) or maxi-
mum position (100%/255/0FFh).
5
6) Adjust the second endpoint:
a) If you set the movement to the minimum position:
Use the ‘1’, ‘4’ and ‘7’ keys on your keypad to adjust
this endpoint. The movement will follow as you ad-
just these settings.
b) If you set the movement to the maximum position:
Use the ‘2’, ‘5’ and ‘8’ keys on your keypad to adjust
this endpoint. The movement will follow as you ad-
just these settings.
7) Clear out any forced outputs: If you used the ‘3’, ‘6’ and
‘9’ keys on your keypad to force an output, you will need
to use these keys to ‘un-force’ it as well. If you don’t, the
output will remain ‘stuck’ at this one position. Just hold
down the ‘3’ key until the value reaches the minimum
G
ILDERFLUKE
& C
O
.• 205 S
OUTH
F
LOWER
S
TREET
• B
URBANK
, C
ALIFORNIA
91502 • 818/840-9484 • 800/776-5972 •
FAX
818/840-9485
E
AST
C
OAST
/F
LORIDA
O
FFICE
• 7041 G
RAND
N
ATIONAL
D
RIVE
• S
UITE
128d • O
RLANDO
, F
L
. 32819 • 407/354-5954 •
FAX
407/354-5955
18 of 22
3
These are the eight bit resolution values. Substitute the twelve bit equiva-
lents of 100%/4095/FFFh if you are using twelve bit resolutions.
4
These are the eight bit resolution values. Substitute the twelve bit equiva-
lents of 100%/4095/FFFh if you are using twelve bit resolutions.
5
These are the eight bit resolution values. Substitute the twelve bit equiva-
lents of 100%/4095/FFFh if you are using twelve bit resolutions.