Harrington Hoists and Cranes Series 3 End Truck - Manual (Page 66)

Fig. Drawing Number Name
Qty. Per Pair of End Trucks
Kit A Kit B Kit C Kit D
27 90934-33 Nut (M12x1.75) -- 8 16 24
28 90125-15 Washer (M12) -- 4 8 12
29 90933-76 Bolt (M12x60) -- 4 8 12
30 90127-13 Spring Washer (M12) -- 4 8 12
31 90435-14 “I” Tapered Washer (9º) (M12) -- 4 8 12
32 HCCF005 Hand Chain 1 Pc. 1 Pc. 1 Pc. 1 Pc.
* See note A, B, C, and D.
** See note E and F.
Note:
A. Use with the following end truck models:
UG-3-0235
B. Use with the following end truck models: TG-3-0135, 0335, 0535 & UG-3-0335, 0535
C. Use with the following end truck models: TG-3-0550 & UG-3-0250, 0350, 0550
D. Use with the following end truck models: TG-3-0150, 0350
E. Use with the following end truck models: TG-3-01xx, 03xx, 05xx & UG-3-03xx, 05xx
F. Use with the following end truck models: UG-3-02xx
Kit A for spans less than or equal to 4.9 meters.
Kit B for spans greater than 4.9 meters and less than or equal to 9.8 meters.
Kit C for spans greater than 9.8 meters and less than or equal to 14.6 meters.
Kit D for spans greater than 14.6 meters.
S
ect
io
n
1
0 R
ep
lacem
en
t P
ar
ts
10.
3
H
an
d
W
h
eel
&
D
ri
ve
S
h
af
ts
66