IAI America RCLE-GR5L - Manual (Page 29)

23
9. Treatment of Cables
When constructing the application system, make sure to lay out each cable and connect them
correctly otherwise it may cause unexpected troubles such as cable breakage or contact failure.
Described below are the things that are prohibited to be done regarding the treatment of cables.
Ɣ Do not cut and extend, shorten or rejoin the cables.
Ɣ Have a sufficient radius for bending to avoid stress being applied to one place. [For the bending
radius, refer to the name of each part.]
Steel Strap
(Piano Wire)
Tie them up softly.
• Do not let the cable bend, kink or twist.
Ɣ Do not pull the cable with a strong force.
Ɣ Do not let the cable receive a turning force at a single point.