ID Innovations Classic Line Series Magnetic Stripe Readers - Manual (Page 24)

Features
24
Quick Format
To change the Track Output format, you can simply use one of the two predefined Quick Formatting options. These two
options configure the Card Reader for some of the more popular credit card software packages. After pressing the Quick
Keys for the formatting option the Card Reader will produce a series of beeps indicating that it has entered programming
mode followed by a second series of beeps indicating the Card Reader has exited programming mode and changes have
been saved. After the normal programming beeps the Card Reader will issue the appropriate number of beeps for the
option selected. The Quick Format keys are as follows:
Option 1 – Left-Control, 1, Right-Shift, and Enter
Classic Line: ; Value Line: ;
Selecting this option will instruct the Card Reader to output all tracks followed by a single Carriage Return. This mode is
the factory default. The following is an example of the output format:
<Track 1 Card Data><Track 2 Card Data><Track 3 Card Data><Carriage Return>
Option 2 – Left-Control, 2, Right-Shift, and Enter
Classic Line: ; Value Line: ;
Selecting this option will instruct the Card Reader to output a Carriage Return after each Track of data.
<Track 1 Card Data><Carriage Return>
<Track 2 Card Data><Carriage Return>
<Track 3 Card Data><Carriage Return>
OLE POS (OPOS) Toggle– Left-Control, 4, Right-Shift, and Enter
Classic Line: Value Line: ;
This option is used to Toggle the OLE POS (OPOS) output mode state. If OLE POS (OPOS) mode is currently Off using
this key sequence will enable it and likewise if it is enabled it will disable this option.
Good Read Beep Toggle– Left-Control, Caps Lock, Right-Shift, and Enter
Classic Line: Value Line: ;
This option is used to Toggle the Good Read Beep. If Good Read Beep is on then it will be turned off and likewise if it is
off it will be turned on.