ID Innovations Bar code Mini Decoder - Manual (Page 45)

Appendices
45
Appendix-C Decoder Pinouts and Specifications
Pinouts
The following drawing details the pinouts of the keyboard (KB) and the computer (PC) end of the decoder cable. Both the
keyboard and computer connectors are wired identically to the standard PC keyboard and computer connectors.
KB Connector
End View
End View
PC Connector
6 5
4 3
2 1
1
2
3
4 5
KB Connector - 6 Pin Mini-Din Female
PC Connector - 5 Pin Din Male
1. Keyboard Data
2. Reserved
3. Ground 4. +5 VDC
5. Keyboard Clock
6. Reserved
1. Keyboard Clock (Wand Data)
2. Keyboard Data
3. Reserved
4. Ground
5. +5 VDC
The following drawing details the pinout of the scanner port (9 Pin D) of the decoder:
1 2 3 4 5
6 7 8 9
Scanner Connector - 9 Pin D Male
1. Laser Sync In
2. Bar code Data In (Wand Data In)
3. Good Read Out
4. No Connection
5. Laser Trigger In
6. Laser-Scan Enable Out
7. Ground (Wand Ground)
8. Shield Ground
9. +5 VDC
Scanner Connector
End View
Specifications
Electrical
5 VDC ±5% @ 20 milliamp MAX(standby) - 5 milliamp MAX(standby-LED Power Save Mode) - 60 milliamp MAX(operating)
Mechanical
1.65"W X 0.90"H X 3.75"L
6' Y-Cable with 6" adapter for 5 pin DIN and 6 pin Mini-DIN connections
Environmental
0 - 60° C operation temperature
10 - 90% relative humidity (non condensing)
Regulatory
FCC Class A tested and verified