Specifications – IDEC DATAVS2 Series User Manual
Page 71
Instruction
Manual
SVS2
Series
66
12. SPECIFICATIONS
SVS2:
Supply voltage:
24 VDC ± 10%
Ripple voltage:
1 Vpp max with illuminator
2 Vpp max without illuminator
Current draw:
(excluding output
current and illuminator)
100 mA at 24 VDC
Current draw with illuminator:
(depends on how long illuminator
stays on)
< 200 mA at 24 VDC
Outputs:
2 PNP outputs
(short circuit protection)
Network interface:
M12 4-pole – 10/100 Mbps Ethernet
Interface for external illuminator:
Strobe signal (TTL)
Output current:
100 mA max
Output saturation voltage:
< 2 V
Optics: Integrated
Resolution:
640 × 480 (VGA)
Indicators: 4
LEDs
Setup:
1 Teach-In key
Data retention:
Non-volatile FLASH memory
Operating temperature:
-10 °C … +55 °C
Storage temperature:
-25 °C … +75 °C
Vibration:
0.5 mm amplitude, 10 … 55 Hz frequency,
for every axis (EN60068-2-6)
Shock resistance:
11 ms (30 G) 6 shock for every axis
(EN60068-2-27)
Housing material:
Aluminium alloy / ABS
Mechanical protection:
IP50
Connections:
M12 8-pole A-code, M12 4-pole D-code
Weight: 125
g.
IMAGE SENSOR:
Technology: CMOS
Supply voltage:
3.3 V
Size:
⅓-inch
Pixel matrix:
752 x 480
Pixel size:
6.0 µm x 6.0 µm
Maximum frame rate:
60 fps
SNR: 55
dB
Responsivity:
4.8 V / lux-sec