Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 57)

SierraNet M408 User Manual 55
Analyzer Settings Teledyne LeCroy
Figure 2.23: Session Controller Pane
Disabling a port can be used to save recording buffer space. A disabled port can still
trigger the analyzer.
Auto Speed is the default port speed selection. It will automatically detect and display the
line speed. In rare cases (such as debugging speed negotiation), it might be desired to set
the analyzers speed manually. Note, that when the speed is set manually, traffic at
different speeds will not be captured correctly.
2.5.4 R ecording Settings Pane
Use the Recording Settings (see Figure 2.24 on page 55 ) pane to select and set the
number and size of segments and save a new trace file. (See “Buffer Size and Segments”
on page 140 .)
Figure 2.24: Recording Settings Pane
Start/Stop Session Button before recording is started
Start/Stop Session Button after recording is started
Slider
Click to display the Recording
Settings dialog