ACTiSYS ACT-IR8250SW - Manual (Page 12)

The Infrared Wireless Expert
ACT-IR8250SW
User’s Manual
Using IR8250SW
This tutorial illustrates how you may use the IR8250SW to download a firmware and change the config
settings.
Before reading this chapter you should:
Have installed the IR8250SW software, as described in the chapter Installation for ACT-IR8250SW.
Setup the IR8250P evaluation kit , as described in the IR8250P Specification.
Make sure that the AC adaptor (P1) and RS-232 cable (J2) has been connected correctly.
J2
P1
1. Click
Starts Programs ACTiSYS IR8250SW
to run the IR8250SW software.
Page 11 of 20 Version 0.12
April 09, 2004
© Copyright 2003-2004 ACTiSYS Corp.