IEI Integration PICOe-B650 - Manual (Page 54)

PICOe-B650 Half-size PCIe CPU Card
Page 42
Step 5: Connect the fan cable. Connect the cooling kit fan cable to the fan connector
on the PICOe-B650. Carefully route the cable and avoid heat generating chips
and fan blades. Step 0:
4.3.3 SO-DIMM Installation
To install a SO-DIMM, please follow the steps below and refer to Figure 4-6.
Figure 4-6: SO-DIMM Installation
Step 1: Open the SO-DIMM socket handles. Open the two handles outwards as far as
they can. See Figure 4-6.
Step 2: Align the SO-DIMM with the socket. Align the DIMM so the notch on the
memory lines up with the notch on the memory socket. See Figure 4-6.
Step 3: Insert the SO-DIMM. Once aligned, press down until the SO-DIMM is properly
seated. Clip the two handles into place. See Figure 4-6.
Step 4: Removing a SO-DIMM. To remove a SO-DIMM, push both handles outward.
The memory module is ejected by a mechanism in the socket. Step 0: