3 lan connection (single connector), Figure 4-12: hdmi connection – IEI Integration KINO-DQM871 User Manual
Page 87
KINO-DQM871 Mini-ITX SBC
Page 71
Figure 4-12: HDMI Connection
Step 3:
Insert the HDMI connector. Gently insert the HDMI connector. The connector
should engage with a gentle push. If the connector does not insert easily, check
again that the connector is aligned correctly, and that the connector is being
inserted with the right way up.
Step 0:
4.9.3 LAN Connection (Single Connector)
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1:
Locate the RJ-45 connectors. The locations of the LAN connectors are shown
in Chapter 3.
Step 2:
Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the KINO-DQM871. See Figure 4-13.