IEI Integration IMBA-9454 v1.00 - Manual (Page 162)

IMBA-9454 Motherboard
Page 144
6.4.3 Removable Drives
Use the Removable Drives menu (BIOS Menu 20) to specify the boot sequence of the
available FDDs. When the menu is opened, the FDDs connected to the system are listed
as shown below:
1st Drive [1st FLOPPY DRIVE]
2nd Drive [2nd FLOPPY DRIVE]
NOTE:
Only the drives connected to the system are shown. For example, if
only one FDD is connected only “1st Drive” is listed.
The boot sequence from the available devices is selected. If the “1st Drive” option is
selected a list of available FDDs is shown. Select the first FDD the system boots from. If
the “1st Drive” is not used for booting this option may be disabled.
BIOS Menu 20: Removable Drives