IEI Integration IMBA-Q670 v1.02 - Manual (Page 165)

IMBA-Q670 ATX Motherboard
Page 149
B.1 One Key Recovery Introduction
The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup
and recovery tool. The one key recovery provides quick and easy shortcuts for creating a
backup and reverting to that backup or for reverting to the factory default settings.
The IEI One Key Recovery tool menu is shown below.
Figure B-1: IEI One Key Recovery Tool Menu
Prior to using the IEI One Key Recovery tool (as shown in
79
Figure B-1) to backup or
restore Windows system, five setup procedures are required.
1. Hardware and BIOS setup (see Section
79
B.2.1)
2. Create partitions (see Section
79
B.2.2)
3. Install operating system, drivers and system applications (see Section
71
B.2.3)
4. Build-up recovery partition (see Section
71
B.2.4)
5. Create factory default image (see Section
71
B.2.5)
After completing the five initial setup procedures as described above, users can access
the recovery tool by pressing <F3> while booting up the system. The detailed information
of each function is described in Section
71
B.4.
NOTE:
The initial setup procedures for Linux system are described in
Section
71
B.3.