IEI Integration IMBA-Q670 v3.01 - Manual (Page 84)

IMBA-Q670 ATX Motherboard
Page 66
Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is
shown in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse
connector into the appropriate PS/2 connector on the external peripheral
interface connector. See Figure 4-17.
Figure 4-17: PS/2 Keyboard/Mouse Connector
4.5.6 Serial Device Connection
The IMBA-Q670 has a single female D-sub 9 connector on the external peripheral
interface panel for a serial device. Follow the steps below to connect a serial device to the
IMBA-Q670.
Step 1: Locate the D-sub 9 connector. The location of the D-sub 9 connector is shown
in Chapter 3.
Step 2: Insert the serial connector. Insert the D-sub 9 connector of a serial device into
the D-sub 9 connector on the external peripheral interface. See Figure 4-18.