IEI Integration IMBA-C604EP - Manual (Page 36)

IMBA-C604EP ATX Server Board
Page 20
3.2.3 Battery Connector
CAUTION:
Risk of explosion if battery is replaced by an incorrect type. Only
certified engineers should replace the on-board battery.
Dispose of used batteries according to instructions and local
regulations.
CN Label: BAT1
CN Type: Battery holder
CN Location: See Figure 3-4
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.
Figure 3-4: Battery Connector Locations
3.2.4 Chassis Intrusion Connector
CN Label: JCHASSIS1
CN Type: 2-pin header
CN Location: See Figure 3-5
CN Pinouts: See Table 3-5