IEI Integration NANO-QM57A - Manual (Page 83)

NANO-QM57A EPIC SBC
Page 71
NOTE:
Smart fan functions are supported only when using a 4-pin fan. When
using a 3-pin fan, the functions are not supported.
Î First Boundary Temperature [060]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.
ƒ Minimum Value: 1°C
ƒ Maximum Value: 128°C
Î Second Boundary Temperature [050]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.
ƒ Minimum Value: 1°C
ƒ Maximum Value: 128°C
Î Third Boundary Temperature [040]
WARNING:
CPU failure can result if this value is set too high