IEI Integration NOVA-HM551 v1.10 - Manual (Page 73)

NOVA-HM551 5.25" SBC
Page 59
The LCD voltage selection jumper sets the voltage of the power supplied to the LCD
panel.
Setting Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5.0 V
Table 4-6: LVDS Voltage Selection Jumper Settings
Figure 4-10: LVDS Voltage Selection Jumper Locations
4.5.6 LVDS Panel Resolution Select
Jumper Label: J_PID1
Jumper Type: 8-pin header
Jumper Settings: See Table 4-7
Jumper Location: See Figure 4-11
The LVDS Panel Resolution jumper configures the resolution of the LVDS output. The
LVDS Panel Resolution jumper settings are shown in Table 4-6.
Setting Description
OFF 640 X 480 (18-bit)
Short 1-2 800 X 600 (18-bit) (Default)