IEI Integration WAFER-LX v1.22 - Manual (Page 113)

WAFER-LX Motherboard
Page 95
Î OnBoard Audio [Enabled]
Use the OnBoard Audio option to enable or disable the onboard codec.
Î
Disabled The onboard codec is disabled.
Î
Enabled D EFAULT The onboard codec is detected and enabled.
Î Onboard USB1.1 [Enabled]
The Onboard USB1.1 BIOS option enables or disables the onboard USB1.1 controller. If
disabled, USB1.1 devices cannot be used on the system.
Î
Disabled USB 1.1 interface is disabled and cannot be used.
Î
Enabled D EFAULT USB 1.1 interface is enabled and can be used.
Î Onboard USB2.0 [Enabled]
The Onboard USB2.0 BIOS option enables or disables the onboard USB2.0 controller. If
disabled, USB2.0 devices cannot be used on the system.
Î
Disabled USB 2.0 interface is disabled and cannot be used.
Î
Enabled D EFAULT USB 2.0 interface is enabled and can be used.
Î Onboard IDE [Enabled]
Use the Onboard IDE option to specify if the system uses the integrated primary IDE
channel or not.
Î
Disabled The primary IDE channel is not used.
Î
Enabled D EFAULT The primary IDE channel is used.
Î Memory Hole At 15M – 16M [Disabled]
The Memory Hole At 15M – 16M reserves the memory space between 15 MB and 16 MB
for ISA expansion cards that require a specified area of memory to work properly. If an
older ISA expansion card is used, please refer to the documentation that came with the
card to see if it is necessary to reserve the space.