IEI Integration WAFER-CV-D25501_N26001 - Manual (Page 65)

WAFER-CV-D25501/N26001 3.5" Motherboard
Page 50
WARNING:
The diagram below is merely for illustration. The configuration and
connection of the cables from the TFT LCD screen being installed may
be different. Please refer to the installation manual that came with the
TFT LCD screen.
Figure 4-8: LVDS Connector
Step 3: Locate the backlight inverter connector. The locations of the backlight
inverter connectors are shown in Chapter 3.
Step 4: Connect backlight connector. Connect the backlight connector to the driver
TFT LCD PCB as shown in Figure 4-9. When inserting the cable connector,
make sure the pins are properly aligned.