IEI Integration ECW-281B-N270-WT v3.01 - Manual (Page 135)

ECW-281B/281B2-R30/N270 Embedded System
Page 120
Step 5: Insert the SO-DIMM . Push the SO-DIMM chip into the socket at an angle
(
88
Figure 7-2 ).
Figure 7-2: SO-DIMM Installation
Step 6: Open the SO-DIMM socket arms . Gently pull the arms of the SO-DIMM socket
out and push the rear of the SO-DIMM down. (See
88
Figure 7-2 )
Step 7: Secure the SO-DIMM . Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket. Step 0: