IEI Integration UPC-V312-D525 v1.02 - Manual (Page 90)

UPC-V312-D525 Panel PC
Page 76
Î Backlight Control [Inverted]
Use the Backlight Control option to select the backlight control mode.
Î
Normal Brightest at high voltage level
Î
Inverted D EFAULT
Brightest at low voltage level
4.5 Boot
Use the Boot menu (BIOS Menu 17) to configure system boot options.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Boot Save & Exit
Boot Configuration
Bootup NumLock State [On]
Quiet Boot
[Enabled]
Launch PXE OpROM [Disabled]
Boot Option Priorities
Boot Option #1 [PATA: IEI Technolo..]
Hard Drive BBS Priorities
Select the keyboard
NumLock state
---------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 17: Boot
Î Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.
Î
On D EFAULT
Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.