IEI Integration UPC-V315-QM77 - Manual (Page 32)

UP C-V315-QM77 P a n e l P C
P a g e 21
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.3 P re in s ta lle d Co m p o n e n ts
The following components are all preinstalled.
 Motherboard
 TFT LCD screen
 DDR3 memory module
 Resistive type touch screen
 Stereo speakers
 Wireless module
 Webcam
CAUTION:
The UPC-V315-QM77 is an IP 65 compliant panel PC. A user cannot
open the rear cover and install any components inside the
UPC-V315-QM77. Doing so may compromise the system’s waterproof
performance. To install components in the system, please contact the
system vendor, reseller or an IEI sales person directly.
3.4 S S D In s ta lla tio n
To install the SSD into the UPC-V315-QM77, please follow the steps below:
S te p 1: Locate the SSD drive bay access panel. The SSD drive bay access panel is
located on the left side panel of the UPC-V315-QM77.
S te p 2: Remove the SSD drive bay access panel by removing the four retention
screws.