IEI Integration PPC-37xx-N270 v1.01 - Manual (Page 62)

PPC-37xx-N270 Panel PC
Page 46
4.12.4 CF Card Setup
Jumper Label: JCF1
Jumper Type: 2-pin header
Jumper Settings: See Table 4-4
Jumper Location: See Figure 4-17
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in Table 4-4.
CF Card Setup Description
Open Slave Default
Closed Master
Table 4-4: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 4-17.
Figure 4-17: CF Card Setup Jumper Location
4.12.5 Clear CMOS Jumper
Jumper Label: J_CMOS1
Jumper Type: 3-pin header
Jumper Settings: See
6
Table 4-5
Jumper Location: See
6
Figure 4-18