Rapid-Air CABINET REEL: R50, R60 & R70 SERIES - Manual (Page 5)

DANCER ARM LOOP HEIGHT ADJUSTMENT
Eight different loot sensing arm operating positions are selected
manually during set-up. By incrementing the thumbwheel height
switch, the zero point of the dancer arm is raised from it’s rest posi-
tion to the angle shown (as indicated 0-7). The dancer arm will move
from rest position to the angle selected before the pallet reel begins to
rotate.
DANCER ARM LOOP RANGE FUNCTION
30 degree—Loop sensing arm travels through a full 30 degree arc to
vary turntable rotation speed from slow to full speed as controlled by
% speed pot.
20 degree—Loop sensing arm travels through a 20 degree arc to vary
turntable speed from slow to full speed as controlled by % speed pot.
10 degree—Loop sensing arm travels through a 10 degree arc to vary
turntable rotation speed from slow to full speed as controlled by %
speed pot.
5 degree—Only the first 5 degrees of loop sensing arm travel is re-
quired to control turntable rotation from slow through full speed as
controlled by % speed pot.
4