Watlow DIN-A-MITE Style C - Manual (Page 6)

142 mm (5.59 in)
131 mm
(5.17 in)
146 mm (5.74 in)
102 mm (4.0 in)
Front panel is touch-safe,
no clearance is required.
102 mm (4.0 in) clearance for air flow and wire bending radius
102 mm (4.0 in) clearance for air flow and wire bending radius
150 mm
(5.89 in)
44 mm
(1.73 in)
57 mm
(2.26 in)
127 mm
(5.00 in)
79 mm
(3.10 in)
102 mm (4.0 in) minimum
Side
Rail Release Tab
(pull down)
194.1 mm
(7.64 in)
1. Push the unit in and down to catch the rail
hook on top of the rail.
2. Rotate the bottom of the unit in toward the
rail.
3. The rail clasp will audibly “snap” into place.
If the DIN-A-MITE does not snap into place,
check to see if the rail is bent.
4. Mount the cooling fins vertically.
ç
3
WARNING:
Only authorized and
qualified personnel
should be allowed to
install and perform
preventive and corrective
maintenance on this unit.
Failure to follow this
guideline could result in
damage to equipment,
and personal injury or
death.
5
WARNING:
Hot surface, do not touch
the heat sink. Failure to
follow this guideline could
result in personal injury.
ç
Mount the cooling fins
vertically.
Unit Dimensions - Fan-Cooled
з
У
3
5
1
1
2
Mount Dismount
6 WATLOW DIN-A-MITE Style C User's Manual
1. Press down on the release tab while rotating
the unit up and away from the rail.
3
4