Renkus-Heinz RHAON 32-Bit - Manual (Page 22)

Users Manual
Priority Override is one of the unique features of RHAON. It allows you to assign
signal-activated priority override capabilities to any one of the array’s multiple
inputs. The Priority Override controls in the lower right section of the properties
window allow you to set the Attach Time, the Hold Time, the Release Time and
the Threshold Level.
Saving Changes
Although any changes you made in either the Connect or Control windows have been sent to the associated loudspeaker, they have not
been saved to the loudspeakers’s non-volatile DSP memory. Clicking on the Save button at the bottom left of each Properties window will
save them. If you forget to save them, a warning prompt will remind you that the changes have not been saved when you exit the window.
You will also be prompted to Save Your Project before you exit the RHAON software.
22
CONTROL