Mammoth 2 to 6 Tons: High Efficiency, Superior IAQ Single Circuit Vertical (B-Vintage) User Manual
Page 12
12
MAMM-WSHP-IOM-1BA (February 2012)
I/O 583
Mammoth I/O Zone 583 controller delivers powerful
control and communications features all in a compact,
economical package. Fully capable of operating in a
100% stand-alone control mode, the I/O Zone 583 can
connect to a Building Automation System (BAS) using
any of today’s most popular protocols, such as BACnet,
Modbus, N2, and LonTalk,. The I/O Zone 583 also sup-
ports communication to Mammoth line of intelligent
space sensors and keypad/display units.
Key Features and Benefits
I/O point count: 5 digital outputs (relayed), 8 inputs and 3 analog outputs.
Built-in protocol support: BACnet (ARCNET and MS/TP), Modbus RTU, and N2. Optional plug-in communica-
tions boards: LonTalk
On-board battery-backed real-time clock is standard, thus enabling full stand-alone scheduling capabilities as
well as historical trend data storage and alarm event time-stamping.•
Powerful, high-speed 16-bit processor with 1MB Flash memory and 512KB of battery-backed RAM - plenty of
room for even demanding and complex applications.
For standard CAV heat pumps requiring a modulating control points for a waterside economizer (WSE), hot gas
reheat (HGRH) or auxiliary heating.