Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 507)

TTL check: 0, value: 0, rcvd: 64
Byte Sent: 148, Received: 203
Local host: 192.168.1.2, Local Port: 179
Remote host: 192.168.1.1, Remote Port: 8041
ISentSeq: 1656867 SendNext: 1657016 TotUnAck: 0
TotSent: 149 ReTrans: 19 UnAckSeq: 1657016
IRcvSeq: 1984547 RcvNext: 1984751 SendWnd: 64981
TotalRcv: 204 DupliRcv: 313 RcvWnd: 65000
SendQue: 0 RcvQue: 0 CngstWnd: 5840
Syntax: show ip bgp neighbors
show ip bgp neighbors output descriptions TABLE 103
Field Description
Total number of BGP
Neighbors Shows the total number of BGP neighbors.
IP Address Shows the IPv4 address of the neighbor.
AS Shows the Autonomous System (AS) in which the neighbor resides.
EBGP or IBGP Shows whether the neighbor session is an IBGP session, an EBGP session, or a
confederation EBGP session:
• EBGP - The neighbor is in another AS.
• EBGP_Confed - The neighbor is a member of another sub-AS in the same
confederation.
• IBGP - The neighbor is in the same AS.
RouterID Shows the device ID of the neighbor.
VRF Shows the status of the VRF instance.
Configuring BGP4 (IPv4)
FastIron Ethernet Switch Layer 3 Routing Configuration Guide 507
53-1003087-04