Brocade FICON Administrator’s Guide (Supporting Fabric OS v7.3.0) - Manual (Page 103)

Currently supported platforms (Continued) TABLE 11
Brocade
7800, 7840
Fabric OS
Brocade
5300
Fabric OS
Brocade
DCX-4S
Fabric OS
Brocade
DCX
Fabric OS
Brocade
DCX 8510-4
Fabric OS
Brocade
DCX 8510-8
Fabric OS
Brocade
6510
Fabric OS
z196 Driver
86E or 93G v7.3.0 v7.3.0 v7.3.0 v7.3.0 v7.3.0 v7.3.0 v7.3.0
z114 Driver
93G v7.3.0 v7.3.0 v7.3.0 v7.3.0 v7.3.0 v7.3.0 v7.3.0
EC12 at
driver 12K v7.3.0 v7.3.0 v7.3.0 v7.3.0 v7.3.0 v7.3.0 v7.3.0
Supported Brocade blades
The table below lists Brocade blades supported for FICON in various Brocade Switch and Data Center
Backbone products.
Currently supported blades in Brocade Switch and Data Center Backbone products TABLE 12
FC4-16 FC4-32 FX
8-24 1
FC8-16 FC8-32 FC8-48 FC8-64 FC
16-32
FC
16-48 FC
16-64 CR16-8 CR16-4 FC10-6
DCX
8510-8 No No Yes No No No Yes 2 Yes Yes Yes 2 Yes No No
DCX
8510-4 No No Yes No No No Yes 2 Yes Yes 3 Yes 2 No Yes No
DCX No No Yes Yes Yes Yes 3 Yes 2 No No No No No Yes 4
DCX-4
S No No Yes Yes Yes Yes Yes 2 No No No No No Yes 4
48000 Yes Yes Yes No No No No No No No No No No
1. The Ethernet ports of an FX8-24 extension blade can operate with another FX8-24 or Brocade
7800 switch. The maximum number of FX8-24 blades supported in a chassis is four. An FX8-24
can operate with an FX8-24E; however, IPsec and compression is only supported on one 10GbE
port on the FX8-24.
2. The 64-port card is not supported for FICON but may be in the same chassis used for FICON. It
must be in a logical switch that does not have any FICON traffic.
3. For the 48-port card in an 8-slot chassis, FICON is supported in a logical switch configured for
zero-based addressing mode. For this card in a DCX-4S Backbone, FICON is supported only on a
logical switch defined for port-based addressing (mode 2).
4. FC10-6 10 Gbps port blade for ISL connections.
Supported Brocade blades
FICON Administrator's Guide 101
53-1003144-01