Davey RAINBANK WITH SUBMERSIBLE PUMP - Manual (Page 12)

6
6
1
2
5
1
2
3
In-tank Option Model No. KRBS1&2
3
5
6
9
4
7
Above Ground Option Model No. KRB1,2,3&4
9
4
Mains water supply
900kPa Maximum 1
3/4” BSP Male thread 2
3/4” BSP Male thread 3
Pump Power lead 4
RainBank ® Power lead 5
Stop valve
Warning:
Do not reconnect with
mains water supply
Important:
All pipework and outlet
fittings from RainBank
® must
be labelled to AS/NZS 3500
6
Float switch 7
Manual start button 8
Rainwater supply via pump 9
8
8
12 25
puMp outsIDe tank
optIon - oVerall
MoDel no. krb1,2,3&4
InstallatIon oF
subMersIble puMps
1. use teflon tape on the pipe
to pump connection.
2. secure the power cable to the delivery
pipe with cable ties.
3. place pump into tank.
4. Davey recommends the fitting of
floating inlets to submersible pumps
to minimize any possibility of sludge
intake. part number to suit pump
D42a/b is FI-42.
Cable tie
PVC pipe
Union
Float switch
Pump
Handle
!
IMPORTANT
Do not pull on power lead. Fit a
rope to handle for lowering and
raising pump.
6
6
1
2
5
1
2
3
In-tank Option Model No. KRBS1&2
3
5
6
9
4
7
Above Ground Option Model No. KRB1,2,3&4
9
4
Mains water supply
900kPa Maximum 1
3/4” BSP Male thread 2
3/4” BSP Male thread 3
Pump Power lead 4
RainBank ® Power lead 5
Stop valve
Warning:
Do not reconnect with
mains water supply
Important:
All pipework and outlet
fittings from RainBank
® must
be labelled to AS/NZS 3500
6
Float switch 7
Manual start button 8
Rainwater supply via pump 9
8
8