FallTech DuraTech 6' Single/Twin Self‐Retracting Device - Manual

MSR D05.4
032714
User Instruction Manual
DuraTech® 6' Single/Twin Self‐Retracting Device
This manual is intended to meet the Manufacturer's Instructions as required by ANSI Z359 and should be used as
part of an employee training program as required by OSHA.
WARNING
This product is part of a personal fall arrest, restraint, work positioning, suspension, or rescue system. A Personal
Fall Arrest System (PFAS) is typically composed of an anchorage and a Full Body Harness (FBH), with a connecting
device, i.e., a Shock Absorbing Lanyard (SAL), or a Self‐Retracting Device (SRD), attached to the dorsal D‐ring of
the FBH.
These instructions must be provided to the worker of this equipment. The worker must read and understand the
manufacturer's instructions for each component or part of the complete system. Manufacturer's instructions
must be followed for proper use, care, and maintenance of this product. These instructions must be retained and
be kept available for the worker’s reference at all times. Alterations or misuse of this product, or failure to follow
instructions, may result in serious injury or death.
A Fall Protection Plan must be on file and available for review by all workers. It is the responsibility of the worker
and the purchaser of this equipment to assure that workers of this equipment are properly trained in its use,
maintenance, and storage. Training must be repeated at regular intervals. Training must not subject the trainee to
fall hazards.
Consult a doctor if there is reason to doubt your fitness to safely absorb the shock of a fall event. Age and fitness
seriously affect a worker’s ability to withstand falls. Pregnant women or minors must not use this equipment.
NOTE: For more information consult ANSI Z359
FallTech®
1306 South Alameda Street
Compton, CA 90221, USA
1‐800‐719‐4619
1‐323‐752‐0066
www.FallTech .com
©2014