LumaSense Technologies INNOVA 1316A-2 - Manual (Page 45)

Chapter 3
_________________________________________________________________________________________
_____________________________________________________________________________
BE6021-11 1316A-2 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 45 of 97
After changing the scale and selection of the gases to be shown on
the graph press the APPLY Soft Key to activate the new settings.
1316A-2 Field.
This field is used to change the screen displayed between the up to
four different 1316A-2 to display the measurement result.
Start, Stop, Freeze, Clear Soft Keys.
START and STOP Soft Keys is used to start and stop a measurement
task respectively.
CLEAR Soft Key is used to refresh the screen display.
FREEZE is used to freeze the displayed screen while the monitoring
task is still running.
3.3 Status
Selecting the option Status from the Screens Pull-down menu brings
up a screen showing a status report and internally logged errors
detected by the monitor.
This is useful in helping with the diagnosis of any problems you may
be having with the system.